Diy Guinea Pig Feeder

Posted by

How to make a do-it-yourself sennik for guinea pigs

In the daily portion and in all other breeds – short-haired selfies and long-haired pigs – guinea pig – baldwin. If the grass is simply laid out on the germ cells, it will be sprayed and dug up, as well as eating dirty foods in animals is contraindicated. Ask a question: how to make a sennik for guinea pigs? The answer to this question and useful information can be found in this article.

Diy Guinea Pig Feeder

Before talking about senniki, you should find out why they are needed. The answer is obvious – the senniki are needed for storing hay. All that is needed for this is a marine experience. To find piglet hay, where to get it and how to choose.

Why does mumps hay?

Hay is the most important product in the diet of guinea pigs and the main source of fiber. The health of the pet, the condition of its teeth and normal digestion are directly dependent on hay. It should always be freely available.

Diy Guinea Pig Feeder

Where to get hay?

Industrial areas and livestock walking.

After collection, dry thoroughly in a well-ventilated area, constantly turning over. It is better to store the product in linen bags.

What should be the hay?

    fresher; completely dried, without mold; free of dust and small particles; with long stems; composition – forbs (timothy grass, alfalfa, etc.); Green colour; the smell is fragrant.

DIY Sennik

Many breeders prefer to make senniki on their own.

Hay can fill any capacity, box, soft toy and even sock. Do not immediately throw the trays out of toilet paper. You can hold a private lesson and take it for several hours.

Read more:  How To Contain And How To Feed A Guinea Pig

Simple sennik from a plastic container

To make a feeder, you need a disposable plastic container or any plastic container, presented at hand, and office paper clips (2 or more). The judge is filled with hay and attached to the cells with clothespins. Convenient sennik is ready!

It remains only to regularly fill it with food. If piglets are interested in staples, it is best to hang the clothespins higher so that the pigs do not get hurt.

How to sew a bag for hay

Two identical flaps of fabric (20X30 cm) are folded with the front side to each other. Next, you need to draw in the center at a certain distance from each other two round windows. On one of the flaps the windows are cut out, the edges of the windows are visible with a line. The product is stitched on three sides, the top remains not sewn. After which the product is turned out (the bag turned out). Then you need to sew 4 ties, 2 on each side of each edge (it turns out a handbag with handles). The handbag is stuffed with hay and suspended in a cage.

Sennik out of the box

Food for feeding can be from a shoe box or small household appliances. A cover and one side wall are not needed. The sidewall can be cut off, leaving 5 mm from each edge. Holes are made on two narrow side walls (4 on each side). The sennik is attached to the cells using wood or wire. The container is filled with hay and the sennik is ready.

Wooden Sennitsa

For manufacturing you will need:

    boards or furniture board; drill with a nozzle for grinding; jigsaw; metal grill; hammer; furniture dowels (6 mm).
Read more:  Toys For Guinea Pigs

Boards are cut into pieces: 2 sidewalls 10X13cm; bottom 10X14cm; back wall 18X11 cm. Recesses for the grill are cut in the side walls. The top of the backdrop can be cut in a semicircle (optional). Next, holes for holes will be made, after which they are drilled with a five-millimeter drill. The hoses are driven into the holes with a side knock with a hammer, and the rear and side walls are connected. Then the shunts are inserted into the lower part, the structure is assembled. Next, the product must be sanded, smooth corners. The grill is inserted into the grooves. At the rear hole for attaching to the cage, the sennik is packed with hay and suspended.

How to make a guinea pig feeder?

We will consider detailed instructions for making the Sennitsa. Guinea pigs for clothes made of fabric with two holes in front. It is intended for one pet only. If you need to increase the size of the materials, which will be listed below.

Materials required for cooking:

    Two sheets of A4 paper 50 centimeters from cotton fabric Stationery knife

And now the instruction:

    Before we begin, we need to thoroughly stretch the fabric. In the process, it must be completely dry and ironed. To complete the patterns of our sennitsa, you need to connect 2 sheets of paper with adhesive tape. When everything is ready, you need to cut a rectangle with the parameters of 2225 centimeters. From the residues, cut 2 squares of 5 cm2. Then it should be cut from fabric tissue. Thus, it was located opposite the other. The pattern is fixed with pins. On it should be cut 2 identical copies of the main part of the feeder. Turning the fabric, you need to cut the last part of the bag. Next, unfold 2 pieces of fabric in this way. It is necessary to fix with pins. Cut holes for hay. Using the marking tool, circle the paper blanks along the contour. After that, you need to stick a needle in the middle of the square. Carefully inspect the fabric: with this movement. All that is needed is the diagonal angles that have been dissected. After that, in accordance with the difference in the angle by half a centimeter. This manipulation is repeated for the remaining angles. We remove the remnants of matter. As a result, we get a rectangular fabric. According to the above algorithm, we make the second cut. The next step is to wrap and iron the valves of the holes. Thus, they were created between two layers of matter. To prevent possible expansion of the valves during ironing, secure them with studs or pins.
Read more:  Why Are Guinea Pigs Called Guinea Pigs

By the way, do you know how to treat cystitis in guinea pigs? Look, this is interesting!

Next, flashing with an even line around our holes. Shore the last piece of matter and its strength with pins. In this case, an allowance of 0.5 cm. We bend the edge of the upper part of the feeder inward by half a centimeter. In turn, iron the sides. We sew the top edge of the Sennica, three to four millimeters backed away from it. We install eyelets according to the recommendations in the instructions. We select hooks or other devices. We fill the feeder with hay and attach it to the cage.